Electronic Theatre Controls Source Four Revolution Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sztuczne oświetlenie Electronic Theatre Controls Source Four Revolution. Electronic Theatre Controls Source Four Revolution User manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 16
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Copyright © 2008 Electronic Theatre Controls, Inc.
All Rights reserved.
Product information and specifications subject to change.
Part Number:
7060M1200-06.01
Rev B
Released: June 2008
Picking# 7060M1001-B
User Manual
Production Dates: September 2004 - Present
Przeglądanie stron 0
1 2 3 4 5 6 ... 15 16

Podsumowanie treści

Strona 1 - User Manual

Copyright © 2008 Electronic Theatre Controls, Inc.All Rights reserved.Product information and specifications subject to change.Part Number: 7060M1200-

Strona 2

6 Source Four User ManualShaping the beamThe beam can be shaped using the shutters (see Figure 1), a pattern, an optional drop-in iris, or by rotating

Strona 3 - Table of Contents

7Step 4: Slide the slot cover back toward the shutters until it meets the iris handle. Leave enough space to move the iris handle.Step 5: Secure the d

Strona 4

8 Source Four User ManualAdjusting the yoke positionThe Source Four provides multi-positioning capabilities within its yoke for overall fixture height

Strona 5 - Basic Assembly

9Cleaning Lens and ReflectorReplace lenses if they contain visible damage (cracks or deep scratches) that may impair their effectiveness.Cleaning 14°,

Strona 6 - Fixture information

10 Source Four User ManualStep 9: Set the lens back in the lens tube with the ridged side facing the front of the tube. Reinstall the lens brackets.St

Strona 8 - Replacing the HPL Lamp

Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736London,

Strona 10 - Shaping the beam

iETC®, Emphasis®, Expression®, Insight™, Imagine™, Focus™, Express™, Unison®, Obsession® II, ETCNet2™, EDMX™, Source Four®, Revolution®, Sensor®, and

Strona 12 - Adjusting the yoke position

1Basic AssemblyWARNING:Please note the following safety warnings before use:Do not mount the fixture on or near combustible surfaces.Do not operate th

Strona 13 - Cleaning Lens and Reflector

2 Source Four User ManualFixture informationHPL lamp tableColor frame holderThe color frame holder is equipped with a spring-loaded retaining clip tha

Strona 14 - Cleaning the reflector

3Step 2: Insert the color frame.Step 3: Lock the retaining clip by pushing sideways while gently pushing forward.For maximum gel life with specific le

Strona 15

4 Source Four User ManualReplacing the HPL LampA lamp must be installed before you use the fixture.Step 1: Disconnect power to the Source Four before

Strona 16

5AdjustmentsCentering lamp and adjusting the fieldThe two concentric knobs located on the lamp housing allow you to align the lamp and adjust its fiel

Komentarze do niniejszej Instrukcji

Brak uwag