Electronic Theatre Controls Emphasis Lighting Control System Instrukcja Użytkownika Strona 216

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 215
206 Emphasis Console v2.0.0 User Manual
To set the Remote Macro assignments:
Step 1: Power up or reboot the Facepanel.
Step 2: When the prompt appears at startup, press [1][2][3] to enter the configuration
menu.
Step 3: Using the down-arrow [
v] key, scroll to Remote Macros and press [Enter].
Step 4: Using the up- or down-arrow [
u][v] keys, scroll to the Remote Macro System ID
you want to adjust and press [Enter].
Step 5: Enter the new system ID and press [Enter].
Step 6: Using the up- or down-arrow [
u][v] keys, scroll to the Remote Macro Macro ID
you want to adjust and press [Enter].
Step 7: Enter the new macro ID and press [Enter].
Step 8: Press [S8] to save your settings and exit the Remote Macros configuration
screen.
Step 9: Press [S8] to save your settings and exit the main configuration screen.
Remote Trigger
The Remote Trigger feature sends an “On” or “Off” signal to any external device that
responds to a remote contact closure. The Remote Trigger commands “On Trigger” (switch
closed) and “Off Trigger” (switch open) are stored in macros. You can set the Remote
Trigger ID in Emphasis Visualization for mapping in multiple Facepanel systems.
Remote Trigger ports are available on Express Facepanels and on ETCNet2 Video Nodes.
To set the Remote Trigger ID in Emphasis Visualization:
Step 1: In the Emphasis mode Setup menu, click IO.
Step 2: In the “Remote Trigger ID” field, enter the new value. This may be any value
between 1-255. The default value is “1”.
Step 3: Click OK.
Przeglądanie stron 215
1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 317 318

Komentarze do niniejszej Instrukcji

Brak uwag